MLX10402 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – The IC drives directly small DC inductive or active loads like electric motors, lamps, etc

MLX10402
Motor Driver IC
Features and Benefits
• Small package (SOIC16)
• Current limitation
• Low power consumption
• Thermal Overload protection
• Microcontroller compatible
Applications
• Small DC inductive motor driver
• Lamp driver
Ordering Information
Part No.
MLX10402
Temperature Suffix
C
Functional Diagram
VDD
IN1
IN2
CONTROL
CIRCUIT
VCC
M1
M2
AUTO
TEMPERATURE
PROTECTION
OVERTEMP
10402 Motor Driver IC
Package
DF (SOIC 16)
Temperature Range
± 0°C to 70°C
Description
The IC drives directly small DC inductive or active
loads like electric motors, lamps, etc. There are four
main driving modes. These are set by digital inputs
“In1” and “In2” :
IN1 IN2 M1 M2 Driving Mode
1
0
1
0
Forward
0
1
0
1
Reverse
1
1
0
0
Brake (Motor shorted)
0
0
Z Z Off (Motor disabled)
The current of the output-drivers is limited for all
kinds of overload- and short-circuit conditions and in
the whole supply voltage- and temperature range.
The outputs “M1” and “M2” need to be off-chip
protected with against motor inductances by
standard Si-diodes.
If the temperature of the chip exceeds a certain
value (changable with pin “Auto”), the temperature-
overload protection-circuit disables the outputs,
preventing the chip from being overheated. In
addition, this so called “temp ovl”-state is signaled
with a low level at the “overtemp”-pin.
MLX10402
3901010402
Page 1
12/Oct/01
Rev. 002