MHP20 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 20W TO-220 HIGH POWER RESISTORS

20W TO-220 HIGH POWER RESISTORS
Features………………………………………………………….
ƒ Non-inductive.
ƒ Thermally enhanced Industry standard TO220 package.
ƒ RoHS compliant.
ƒ Low thermal resistance, 5.9 °C/W resistor hot spot to metal tab.
ƒ Complete thermal flow design available for easy implementation.
ƒ Superior vibration durability.
ƒ Small thin package for high density PCB installation.
Applications………………………………………………………
ƒ High frequency circuits and high speed pulse designs.
ƒ Switch mode power supplies.
ƒ Motor control and drive circuits.
ƒ Automotive.
ƒ Industrial computing and measurement systems.
Specification
Dimensions
A
C
dia.M
D
MHP
J
E
G
H
F
ABC
D
10.6 15.0 4.5 1.5
Specification
Item
Power Rating
Power Rating
Thermal Resistance
Resistance Range
Nominal Resistance Series
TCR
Tolerance
Operation Temp. Range
Max. Operating Volt.
Dielectric Withstanding Voltage
Load Life
Humidity
Temp. Cycle
Soldering Heat
Solder ability
Insulation Resistance
Vibration
E
F
G
H
2.7 5.08 0.75 0.5
J
K
1.5 19.0
0.01-0.09 Ω
E6
250 ppm/°C
+/- 5% (J)
Specifications
20 Watts
2.25 Watts
5.9 °C/W
0.1-9.1 Ω
E12
100 ppm/°C
5% (J)
-55°C to+155°C
500V or _P.R
2000 Volts AC
∆R +/-(1.0 %+0.05 Ω)
∆R +/- (1.0 %+0.05 Ω)
∆R +/- (0.25 %+0.05 Ω)
∆R +/- (0.1 %+0.05 Ω)
Over 95% of surface
Over 1,000 MΩ
∆R +/- (0.25 %+0.05 Ω)
10-220 Ω
E24
50 ppm/°C
+/-1% (F)
.
L
MN
2.7 3.6 15.0
Test Conditions
-55 to 25 °C flange temperature
Free air.
Hot spot to Tab
Up to 51 KΩ also available
2.5 Ω and 5.0 Ω also available
-55 to +155 °C
60 seconds.
25 °C, 90 min. ON, 30 min . OFF, 1000 hours.
40°C, 90-95% RH, DC 0.1 W, 1000 hours.
-55 °C,30 min.,+155 °C,30 min., 5 cycles
250+/-5 °C, 3 seconds,
230+/-5 °C, 3 seconds.
Between terminals and tab.
Specifications subject to change without notice
1