MC6FD034-30P1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Dual Row IDC Socket, With Strain Relief

PART NO.
MC6FD010-30P1
REVISIONS
ECN # REV
-
1.0
DESCRIPTION
RELEASED
DRAWN DATE CHECKD DATE APPRVD DATE
DO 19/04/12 ER 19/04/12 ER 19/04/12
Part Number Table
Description
Dual Row IDC Socket, With Strain Relief
Dimensions : Millimetres (Inches)
A ± 0.13 (.005)
10.16(.400)
15.24(.600)
17.78(.700)
22.86(.900)
30.48(1.200)
40.60(1.600)
48.26(1.900)
60.96(2.400)
B ± 0.25 (.010)
17.35(.683)
22.43(.883)
24.97(.983)
30.05(1.183)
37.67(1.483)
47.83(1.883)
55.45(2.183)
68.15(2.683)
Part Number
MC6FD010-30P1
MC6FD014-30P1
MC6FD016-30P1
MC6FD020-30P1
MC6FD026-30P1
MC6FD034-30P1
MC6FD040-30P1
MC6FD050-30P1
Specification
Current Rating
: 1Amp
Dielectric withstanding Voltage : 500V AC Min. for one Min.
Insulation Resistance
: 1,000MΩ Min. at 5,00V DC
Working Temperature
: -25°C to +85°C
Contact Resistance
: 30mΩ Max. Mated
Insulator Material
: Glass Filled PBT Resin, Black
Contact Material
: Brass
Durability
: 100 Cycles
Wire Size
: AWG 28 Stranded .050″ (1.27MM)
Center Ribbon Cable
Mating Force
: 5.75oz (163g.f.) per Contact Max.
Unmating Force
: 0.70oz (20g.f.) per Contact Min.
Mating Pin Length
: 200″ (5.08MM) to .250″(6.35MM)
of .025″ (6.35MM) SQ. or Round Pin
www.element14.com
www.farnell.com
www.newark.com
Important Notice :  This data sheet and its contents (the “Information”) belong to the members of the
­Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any
­intellectual property rights is granted. The Information is ­subject to change without notice and replaces all
data sheets ­previously supplied. The ­Information supplied is believed to be accurate but the Group assumes
no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of
it. Users of this data sheet should check for themselves the Information and the suitability of the products
for their purpose and not make any assumptions based on information included or omitted. Liability for loss
or damage resulting from any reliance on the Information or use of it (including liability resulting from negli-
gence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will
not o­ perate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
­Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
TOLERANCES:
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
DRAWN BY:
DO
CHECKED BY:
ER
APPROVED BY:
ER
DATE: DRAWING TITLE:
19/04/12
Dual Row IDC Socket, With Strain Relief
DATE: _{SIZE DWG NO.}
ELECTRONIC FILE
REV
19/04/12 _{A4 MC6FD010-30P1-01 MC6FD010-30P1-1 1.0}
DATE:
19/04/12 ^{SCALE: NTS}
U.O.M.: mm (inch) SHEET: 1 of 1