LVS10056B160 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Chip varistor provides high reliability on surface mounting

Chip Varistor
DESCRIPTION
The LVS series is metal oxide based chip varistor for transient
voltage suppression. They have non-linear voltage-current
behavior, similar to zener diode. Multilayer structured varistor,
however, shows superiority in electrical reliability than zener
diode, since each grain exhibits small p-n junction. In addition,
LVS series shows better electrical properties such as high
clamping voltage and low leakage current.
FEATURES
*Chip varistor provides high reliability on surface mounting
*Wide range of working voltage (VW = 5.6V˜30V)
*Good clamping ratio and low leakage current
*Electroplating of Ni and solder gives higher solderability
*Wide operating temperature (-55˜125°C )
*Various capacitance is available
APPLICATIONS
*Protection from transient voltage noise in all kinds of IC
*Protection from ESD, EFT and surge in power I/O port
*Replacement of zener diode
ORDERING INFORMATION
LVS 10 033 B 200 401
Series
LVS = Standard
LVSL = Low
Capacitance
Capacitance
030 = 3pF
300 = 30pF
301 = 300pF
Size
10 = 1005(0402)
16 = 1608(0603)
20 = 2012(0805)
32 = 3216(1206)
Working voltage
056 = 5.6V
090 = 9.0V
260 = 26V
Clamping voltage
100 = 10V
300 = 30V
Transient energy
Z = 0.005J
A = 0.02J
B = 0.05J
C = 0.1J
D = 0.2J
E = 0.3J
F = 0.4J
G = 0.6J
H = 0.8J
I = 1.0J
J = 1.3J
K = 1.5J
www.rhopointcomponents.com Tel: [phone] Fax: [phone]
1