English
Language : 

LP1240-12-YZ Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Switch-Mode LED Driver
LED Power Supply Product
LP1240-XX-YZ-E Series
Switch-Mode LED Driver
Total Power
240 Watts
Input Voltages
90-264 VAC
Number of Outputs Single
Specifications
ANZ#: Z157, August 6, 2009
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
• Single output 240W
Input range
90 to 264 VAC, Full range
• In compliance to EN61000-3-2, -3-3 Class D Frequency
•
Power Factor
Low Inrush Current maximize number of hookup Inrush current
• Incompliance to NEMA3, IP66 standards
Input current
47 to 63 Hz
> 0.95 at full load, 115VAC
5.0 Amps maximum at 115VAC, cold start, 25º C
3.0Amps maximum at 115VAC
• Suitable for damp or dry locations
Efficiency
85% typical at 230VAC and maximum load
• Suitable for wet location when use adequate
connectors
• Aluminum extrusion enclosure with special
designed junction box built-in
• OCP, OVP, OPP and SCP – shut down
EMI filtering 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A
Maximum power 240W total
Line Regulation 1%
Load Regulation ±3%
Ripple Noise 3% typ.
Leakage Current 2mA @ 110VAC, 4mA @ 230VAC
OTP – Auto-recovery
Hold up time Half cycle minimum at 120 VAC and 80% of rated
ENVIRONMENTAL
Operating temperature:
-30 to 70 º C
Protection
(De-rating : 2.5% per ºC from 50ºC~70ºC )
Storage temperature:
-40 to 85 º C
SAFETY
load
Over-voltage, Over-current, Over-temp. and Short
circuit protection
Humidity (Non-Condensing): 5% to 95%
UL/cUL
UL1012 Recognized
Cooling:
Convection
CE
Certified
Vibration Frequency:
5 to 50 Hz
MTBF: >100,000 Hours at full load and 25ºC
ambient conditions (MIL-217F)
EMC : Compliant to 47CFR, Part 2, Part15 and
Cispr PUB, 22 Class B
Model #
DC Output
Output Current (A)
Output Voltage (V)
Total Output (Watts)
LP1240-12-YZ
0.2 ~ 20.0
12V, ± 3%
240
LP1240-24-YZ
0.1~ 10.0
24V, ± 3%
240
LP1240-48-YZ
0.1 ~ 5.0
48V, ± 3%
240
MECHANICAL DRAWING
Model Information – Single DC output
LP1240-XX-YZ
XX – DC outputs
Y – AC input connector (J – Junction Box)
Z – DC output connector (G – Gland, T – Terminal Block or J – Junction Box)
INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz157