KL5KUSB200 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – USB2.0 Transceiver

KL5KUSB200
USB2.0 Transceiver
General Description
The Kawasaki USB 2.0 Compliant Transceiver is the interface between the high performance USB serial
bus and the 16-bit SIE bus. The high-speed analog interface and the digital serial bit processing feature
of the USB 2.0 transceiver enables a highly integrated USB 2.0 device. The transceiver is controlled by
input signals from the SIE bus which is synchronized with the 30MHz clock output. The Kawasaki
Transceiver also provides output signals to monitor the USB bus status. The Kawasaki Transceiver, SIE,
and logic design are combined to create Kawasaki's USB chip solutions for peripheral devices or can be
used as IP with our ASIC technology.
Features
• USB 2.0 compliant transceiver
• UTMI based design (USB 2.0 Transceiver Macro
cell Interface)
• Generates 48MHz to 480MHz input
• Full Speed / High Speed capabilities
• Supports “Chirp” for High Speed recognition
• Support Reset and Suspend
• Operational mode selection
• Status signals for monitoring USB bus
• Optional CRC verification/generation logic
• Mode bit expansion for device test
• 16 bit Bi-directional SIE bus
• TX data packet abort
• ASIC IP supports High speed SIE with
ASIC IP
• 80 pin LQFP package (12 mm²)
Block Diagram
USB Bus
HSDP
HSDM
High Speed
Front end
HS
EBUF
DLL
RPU_ENA
FSDP
FSDM
Full Speed
Front end
DPLL
External
48MHz Clk
Clock
Generator
Shared
Logic
SIE
Interface
SIE Bus
Control Signals
Status
CKOUT
SIE_Data
US: Kawasaki LSI , 2570 N. 1^st Street, San Jose, CA 95131,Tel:[phone], Fax[phone], www.klsi.com
Japan: Kawasaki Steel Corp, Makuhari Techno-Garden B5, Nakase 1-3, Mihama-ku, Chiba, 261-8501Tel:[phone], Fax:[phone], email:[e-mail]
Ver. 2.2
1