JM70100-1CR Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – IEC 700V/100A modular blocks for 22x58 mm fuses

Technical Data 10496
Effective November 2016
IEC 700V/100A modular blocks for 22x58 mm fuses
The patented power distribution fuse block
configurations simplify your panel layout and
require up to 78% less panel space. Additionally,
they lower inventory cost while reducing
installation time and labor by an average of 36%.
Fuses not included.
Catalog symbols:
• JM70100-_CR (fuse block)
• JM70100-_MW_ (power distribution fuse block)
Description:
Eaton’s Bussmann™ series JM70100 products
are available for 22x58 mm gG, aM and select
high speed fuses as either a fuse block or power
distribution fuse block that eliminates the need for
a separate power distribution block.
These new blocks have multiple features that
increase versatility, reduce labor and enhance
safety for any panel or electrical system design.
Rated for applications up to 700 V and 100 amps,
their modular design allows for assembly of
multiple pole configurations at the point of use.
These blocks can also be ordered as factory
configured 2- and 3-pole versions.
The versatile 35 mm DIN-rail or panel mount
capability allows using the same block for multiple
applications and reducing inventory cost.
Optional IP20 finger-safe covers enhance electrical
safety with a lockout/tagout feature and can be
ordered with or without open fuse indication to
speed troubleshooting.
Features and benefits:
• Combination power distribution block and fuse
block versions reduce wire connections and
total panel components, requiring up to 78%
less panel space and reducing installation time
and labor by an average of 36%.
• A 200kA withstand rating helps achieve a higher
assembly short-circuit current rating (SCCR)
for compliance with NEC^® sections 110.10,
409.110(4), 409.22, 440.4(B), 670.3(A)(4) and
670.5.
• Optional see-through cover enhances safety
with IP20 finger-safe protection, lockout/tagout
capability and open circuit indication.
• Available in 1-, 2-, and 3-pole configurations to
meet stocking requirements.
• To reduce inventory, assembly time and labor,
modular single-pole blocks snap-together for
tool-less assembly of multiple poles at point of
use.
• DIN-rail and panel mount versatility allows one
product to be used for multiple applications
without incurring additional inventory cost.
• Easy circuit identification with available universal
labels for blocks and covers.