HLD Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Visual indicating fuse

Technical Data 2120
HLD
Effective June 2017
Supersedes November 2012
2004
1/4" x 1 1/4" (6.3 mm x 32 mm) Visual indicating fuse
holder
Dimensions - in (mm)
Product features
• For use with GBA and GLD fuses.
• Bayonet-type transparent knob permits
visual indication of “opened” pin
indicating fuses.
Environmental Data:
Temperature Rating (RTI): +130 °C
Agency information
• *UL Recognized, Guide IZLT2, File E14853
2.5" Max. (HLD)
(63.5mm Max.)
0.86"
(21.8mm)
Washer
0.69"
(17.5mm)
Octagonal Sides
2.75" Max. (HLD-HH)
(69.9mm Max.)
0.505" ± 0.005”
(16.0mm ± 0.13mm)
0.473" ± 0.005”
(12.0mm ± 0.13mm)
Punched Mounting Hole
Electrical Ratings
Symbol
*HLD
HLD-HH
Amps
15
15
Volts AC
250
250
Features
Solder terminals
⁄Ω¢∑ quick-connect terminals
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used
in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronics
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 2120 SB98107
June 2017
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.