|
HLC-1520A Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Tadiran HLC (Hybrid Layer Capacitor) | |||
|
1. Scope
Tadiran HLC (Hybrid Layer Capacitor)
Model HLC-1520A
This data sheet describes the mechanical design and performance of Tadiran HLC (Hybrid Layer
Capacitor) model HLC-1520A, optimized for extreme temperatures, used in a Pulses Plusï battery.
2. Characteristics
2.1. Physical
2.1.1. Length: 19.7 ± 0.3 mm.
2.1.2. Diameter: 15.1 mm. max.
2.1.3. Weight: 7.7 ± 0.2 gr.
2.2. Electrical
2.2.1. Discharge
Discharge capacity (at RT):
When charged to 3.67V:
When charged to 3.90V:
Discharge end voltage:
Maximum discharge current:
2.2.2.
Charge (constant current)
Max. charge voltage:
Max. charging current:
140 A*sec
210 A*sec
2.5V (discharge below 2.5V at RT and
discharge below 2 V at â40oC may increase
the HLC internal impedance)
Continuous: 500 mA
Pulse: 2 A
3.95 V
25 mA
Rev. D, April 05.
Page 1 of 6
THE INFORMATION PROVIDED HERE IS NECESSARILY OF A GENERAL NATURE. SINCE SPECIFIC PERFORMANCE DEPENDS ON ACTUAL OPERATING AND STORAGE CONDITIONS,
OUR ENGINEERS WILL PROVIDE PARTICULAR APPLICATION INSTRUCTIONS UPON REQUEST. DATA SUBJECT TO REVISION WITHOUT NOTICE. ANY REPRESENTATION IN THIS
BROCHURE CONCERNING PERFORMANCE ARE FOR INFORMATION PURPOSES ONLY AND NOT WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF FUTURE PERFORMANCE.
TADIRANâS STANDARD LIMITED WARRANTY, STATED IN ITS SALES CONTRACT OR ORDER CONFIRMATION FORM IS THE ONLY WARRANTY OFFERED BY TADIRAN.
|
▷ |