FMC-HMI Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – FMC-HMI™ Reference Manual

FMC-HMI™ Reference Manual
Revision: September 19, 2012
Note: This document applies to REV B of the board.
1300 NE Henley Court, Suite 3
Pullman, WA 99163
[phone] Voice | [phone] Fax
Overview
The FPGA Mezzanine Card-Human Machine
Interface (FMC-HMI) peripheral board enables
developers to add a human interface to field-
programmable gate array (FPGA) based
systems. The FMC-HMI provides a
development platform for customers to utilize
image capture, touch digitizer and graphical
user interface applications.
Functional Description
The FMC-HMI captures light with the Aptina
MT9D112 digital image sensor. This sensor
provides a maximum resolution of 1600x1200
at 15 frames per second FPS. The Aptina has
a 10-bit raw color depth, an I²C control bus,
and can utilize Bayer, RGB, and YCrCb output
formats. This image sensor utilizes an
automatic exposure, gain, and white balance
with powerful image correction algorithms,
image scaling, and a FIFO output.
Aptina MT9D112
The Aptina MT9D112 is a small (8.5mm x
8.5mm x 5mm) integrated System-on-Chip
(SoC) assembly that includes a 2Mp
complementary metal–oxide–semiconductor
(CMOS) sensor array, a fixed-focus lens with a
3.81mm equivalent focal length, and an image
processor. The sensor assembly comes taped
to the board and connects through a 23-pin
flexible printed circuit (FPC) cable.
Users can control the image processor via a
standard two-wire interface. The FMC-HMI
transfers image data via an 8-bit pixel bus with
additional synchronization signals.
Note: Operators that desire more information
on the Aptina MT9D112 should consult the
Features Include
 Aptina MT9D112 fixed-focus, 2Mp CMOS
digital image sensor
 ADI SSM2603 audio codec with 3.5mm line
in, microphone in, line out and headphone
out jacks
 Shanghai Tianma TM050RBH01 5”
800x480 TFT LCD with integrated 4-wire
touch panel
 Male FMC LPC connector for digital signals
 AMS header for analog signals
 12-pin female Pmod header
 Piezoelectric buzzer
 Compatible with wide range of VADJ
voltages (1.8V-3.3V)
Aptina Imaging product information sheets at:
http://www.aptina.com/products/soc/mt9d112d
00stc/
Or consult the Digilent Inc. VmodCAM product
reference manual at:
http://digilentinc.com/Data/Products/VMOD-
CAM/VmodCAM_rm.pdf
ADI SSM2603
The FMC-HMI features an Analog Devices Inc.
SSM2603 Low Power Audio Codec that
Doc: 502-236
page 1 of 2
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.