English
Language : 

FM25W256 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 256Kb FRAM Wide Voltage Serial Memory
Preliminary
FM25W256
256Kb FRAM Wide Voltage Serial Memory
Features
256K bit Ferroelectric Nonvolatile RAM
• Organized as 32,768 x 8 bits
• Unlimited Read/Write Cycles
• 10 Year Data Retention
• NoDelay™ Writes
• Advanced High-Reliability Ferroelectric Process
Very Fast Serial Peripheral Interface - SPI
• Up to 25 MHz Frequency
• Direct Hardware Replacement for EEPROM
• SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1)
Description
The FM25W256 is a 256-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile and performs reads and writes like a
RAM. It provides reliable data retention for 10 years
while eliminating the complexities, overhead, and
system level reliability problems caused by
EEPROM and other nonvolatile memories.
Unlike serial EEPROMs, the FM25W256 performs
write operations at bus speed. No write delays are
incurred. The next bus cycle may commence
immediately without the need for data polling. The
next bus cycle may start immediately. In addition, the
product offers virtually unlimited write endurance.
Also, FRAM exhibits much lower power
consumption than EEPROM.
These capabilities make the FM25W256 ideal for
nonvolatile memory applications requiring frequent
or rapid writes or low power operation. Examples
range from data collection, where the number of
write cycles may be critical, to demanding industrial
controls where the long write time of EEPROM can
cause data loss.
The FM25W256 provides substantial benefits to
users of serial EEPROM as a hardware drop-in
replacement. The FM25W256 uses the high-speed
SPI bus, which enhances the high-speed write
capability of FRAM technology. Device
specifications are guaranteed over an industrial
temperature range of -40°C to +85°C.
Write Protection Scheme
• Hardware Protection
• Software Protection
Wide Operating Range
• Wide Voltage Operation 2.7V – 5.5V
Industry Standard Configurations
• Industrial Temperature -40°C to +85°C
• 8-pin SOIC (-S)
• “Green” 8-pin SOIC (-G)
Pin Configuration
CS
1
SO
2
WP
3
VSS
4
8
VDD
7
HOLD
6
SCK
5
SI
Pin Name
/CS
/WP
/HOLD
SCK
SI
SO
VDD
VSS
Function
Chip Select
Write Protect
Hold
Serial Clock
Serial Data Input
Serial Data Output
Supply Voltage (2.7 to 5.5V)
Ground
Ordering Information
FM25W256-S 8-pin SOIC
FM25W256-G “Green” 8-pin SOIC
This is a product that has fixed target specifications but are subject
to change pending characterization results.
Rev. 1.0
Aug. 2004
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, (719) 481-7000
www.ramtron.com
Page 1 of 13