DO061A Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 1-3.0 Amp 60 Vdc DC Output MINI-SIP

CURRENT DERATING CURVES
1.0
0.8
0.6
0.4
0.2
0
20
40
60
80
AMBIENT TEMPERATURE (¼C)
DO Max. Load Current vs. Temp.
3
2
1
0
20
40
60
80
AMBIENT TEMPERATURE (¼C)
DMO Max. Load Current vs. Temp.
.950
(24.1)
DO
.400
(10.2)
MAX.
DMO
.200
(5.1)
LOAD CONTROL
12
34
.500
(12.7)
.250
(6.3)
.030
(0.8)
.100
(2.5)
.500
(12.7)
.700
(17.8)
.015
(0.4)
.015
(0.4)
PIN 1: +DC LOAD
PIN 2: -DC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
FastFax Document No. 104
SERIES DO, DMO
Rev. 021202
PAGE 1 OF 1
Series DO, DMO
1-3.0 Amp • 60 Vdc • DC Output MINI-SIP
• Compact for High
Density PCB M ount
• DC Control, DC Output
• Bipolar (DO) or M OSFET
(DM O) Output
• 3-10 Vdc Logic
Compatible Input
• Crydom's Patented Design
SPST-NO DC output relays in epoxy-
coated packages utilize the popular
.10" grid lead spacing. They are avail-
able with either bipolar transistor out-
put (DO), or the DMO063 with MOSFET
output rated at 3A/60 VDC.
Manufactured in Crydom's ISO 9002
Certified facility for optimum product
performance and reliability.
MODEL NO.
INPUT SPECIFICATIONS ➀
Control Voltage Range
DO061A^➃
3.0-9.0 Vdc
DO061B^➃ DM O063^➃
1.7-9.0 Vdc 3.0-10.0 Vdc
Nominal Input Impedance
270 Ohm
270 Ohm
200 Ohm
Typical Input Current @ 5 Vdc
15 mAdc
15 mAdc
20 mAdc
Must Turn On Voltage
3.0 Vdc
1.7 Vdc
3.0 Vdc
Must Turn Off Voltage
1.0 Vdc
0.8 Vdc
1.0 Vdc
OUTPUT SPECIFICATIONS ➀
Operating Voltage Range
3-60 Vdc
3-60 Vdc
0-60 Vdc
Load Current Range
.02-1.0 Adc
0-3.0 Adc
Max. Surge Current
5.0 Adc (1 Sec)
12.0 Adc(10 ms)
Max.Off-State Leakage @ Rated Voltage
Max. On-State Voltage Drop @ Rated Current
200 µAdc
1.5 Vdc
100 µAdc
0.4 Vdc ➁
Max.Turn-On Time
50 µsec
50 µsec
50 µsec
Max. Turn-Off TIme
50 µsec
150 µsec
300 µsec
GENERAL SPECIFICATIONS
Dielectric Strength ➂
Insulation Resistance (Min.) @ 500 Vdc ➂
Max. Capacitance (Input/Output)
Ambient Operating Temperature Range
Ambient Storage Temperature Range
4000 Vrms
109 Ohm
8.0 pF
-30 to 80˚C
-30 to 125˚C
2500 Vrms
109 Ohm
8.0 pF
-30 to 80˚C
-30 to 125˚C
M ECHANICAL SPECIFICATIONS
Weight: (typical)
0.15 oz. (4.3 g)
Encapsulation:
Thermally Conductive Epoxy
GENERAL NOTES
©2002 CRYDOM CORP, Specifications subject to change without notice.
➀ All parameters at 25˚C unless otherwise specified.
➁ Typical On-State Resistance = .13
➂ Dielectric and insulation resistance are measured between input and output.
➃ Inductive loads should be diode suppressed.
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]