D2W202F Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 2-3.5 Amps 120/240 Vac AC Output SIP

Series D2W
2-3.5 Amps • 120/240 V ac • AC Output SIP
• Triac Output
• Printed Circuit Board M ount
• Internal Snubber
• Zero Voltage Sw itching
The D2W Series features an epoxy-
coated package that provides excep-
tional environmental protection.
Pinouts are compatible with Series 6
and OAC type I/O modules.
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
CURRENT DERATING CURVE
3.5
D2W203F-11
3.0
D2W203F
2.5
D2W202F
2.0
1.5
1.0
0.5
20
40
60
80
AMBIENT TEMPERTURE (¼C)
Max. Load Current vs. Temp.
.47 MAX.
(11.9)
1.18
MAX.
(29.9)
CONTROL
LOAD
.39 TYP.
(9.9)
43
2
.200
(5.1)
.700
(17.8) _1.100
(27.9)
1.7 MAX.
(43.2)
1 .050
TYP.
(1.3)
.12
(3.0)
.040 (1.0) DIA.
(4 PLACES)
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
All dimensions are in inches (millimeters)
APPROVALS
UL E116950
CSA LR81689
FastFax Document No. 116
SERIES D2W
Rev. 021202
PAGE 1 OF 1
MODEL NO.
INPUT SPECIFICATIONS ➀
Control Voltage Range
D2W202F
3-32 Vdc
Nominal Input Impedance
1500 Ohm
Typical Input Current @ 5 Vdc
3.0 mAdc
Must Turn On Voltage
3.0 Vdc
Must Turn Off Voltage
1.0 Vdc
OUTPUT SPECIFICATIONS ➀
Operating Voltage Range (47-63 Hz)
24-280 Vrms
Load Current Range
.06-2.0 Arms
Transient Over-Voltage
600 Vpk
Max. Surge Current, (16.6ms)
28 Apk
Min. Off-State dv/dt @ Max. Rated Voltage ➂ 200 V/µsec
Max.Off-State Leakage @ Rated Voltage
8 mArms
Max. On-State Voltage Drop @ Rated Current
1.4 Vpk
Max.Turn-On Time
1/2 cycle
Max. Turn-Off TIme
1/2 cycle
Power Factor (Min.) WIth Max. Load
0.5
D2W203F D2W203F-11
3-32 Vdc
1500 Ohm
3.0 mAdc
3.0 Vdc
1.0 Vdc
3-32 Vdc
1500 Ohm
3.0 mAdc
3.0 Vdc
1.0 Vdc
24-280 Vrms 24-280 Vrms
.06-3.0 Arms .06-3.5 Arms
600 Vpk
600 Vpk
70 Apk
80 Apk
200 V/µsec 200 V/µsec
8 mArms
8 mArms
1.4 Vpk
1.4 Vpk
1/2 cycle
1/2 cycle
1/2 cycle
1/2 cycle
0.5
0.5
GENERAL SPECIFICATIONS
Dielectric Strength ➁
Insulation Resistance (Min.) @ 500 Vdc ➁
Max. Capacitance
Ambient Operating Temperature Range
Ambient Storage Temperature Range
4000 Vrms
10⁹ Ohm
10 pF
-30 to 80¼C
-30 to 125¼C
M ECHANICAL SPECIFICATIONS
Weight: (typical)
Encapsulation:
0.6 oz. (17 g)
Thermally Conductive Epoxy
© 2002 CRYDOM CORP, Specifications subject to change without notice.
GENERAL NOTES
➀ All parameters at 25˚C unless otherwise specified.
➁ Dielectric and insulation resistance are measured between input and output.
➂ Off-State dv/dt test method per EIA/NARM standard RS-443.
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]