English
Language : 

D221RP Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Short Circuit Protected Regulated, 2W SIP DC/DC Converters
D200RP Series
Short Circuit Protected
Regulated, 2W SIP
DC/DC Converters
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Key Features:
Input
Parameter
Conditions
Min. Typ. Max. Units
● 2W Output Power
5 VDC Input 4.5 5.0 5.5
● Short Circuit Protection Input Voltage Range
12 VDC Input 10.8 12.0 13.2
VDC
● Tight Line/Load Regulation
● 1,000 VDC Isolation
● Miniature SIP Case
● >1.5 MHour MTBF
● 15 Standard Models
Input Filter
Reverse Polarity Input Current
Output
Parameter
Output Voltage Accuracy
24 VDC Input 21.6 24.0 26.4
π (Pi) Filter
0.3
A
Conditions
Min. Typ. Max.
±2.0
Units
%
Line Regulation
For Vin Min to Max
±0.5
%
Load Regulation (Note 1)
±0.5
%
Ripple & Noise (20 MHz) (Note 2)
75 mV P - P
Output Power Protection
120
%
Temperature Coefficient
±0.02 %/ºC
Output Short Circuit
Continuous
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
60 Seconds 1,000
VDC
Isolation Resistance
500 VDC 1,000
MΩ
Isolation Capacitance
100 kHz, 1V
60
pF
Switching Frequency
40
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -25 +25 +71
ºC
Operating Temperature Range
Case -25
+85
ºC
Storage Temperature Range
-40
+125
ºC
Cooling
Free Air Convection
Humidity
RH, Non-condensing
95
%
MicroPower Direct
232 Tosca Drive
Stoughton, MA 02072
USA
Physical
Case Size
Case Material
Weight
1.26 x 0.32 x 0.55 Inches (32.0 x 8.0 x 14.0 mm)
Non-Conductive Black Plastic (UL94-V0)
0.17 Oz (4.8g)
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25ºC, Gnd Benign 1.5
Units
MHours
Parameter
Conditions
Min. Typ. Max. Units
5 VDC Input -0.7
9.0
Input Voltage Surge (1 Sec)
12 VDC Input -0.7
18.0
VDC
24 VDC Input -0.7
30.0
Lead Temperature
1.5 mm From Case For 10 Sec
260
ºC
Internal Power Dissipation
All Models
450
mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.