CCR-33 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Miniature DC-18GHz SPDT Switch

Commercial CCR-33
Miniature DC-18GHz SPDT Switch
Failsafe
The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to
switch a microwave signal from a common input to either of two outputs. The characteristic
impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA
connectors.
Specifications
The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is
compatible with the two most common mounting hole patterns. The CCR-33 series switch is
interchangeable with a variety of
switches.
RF Contacts:
Actuator
Switching Time:
Break before make
Voltage (VDC) 20^OC
Current (mA)
20 msec max
12 15 28
200 160 90
If your requirements are more demand-
ing then perhaps the CCM-33 Range
of 10 Million cycle switches would be of
interest.
Connectors:
SMA (f)
Weight:
1.65 oz. max
Temperature Range: -25^O C to +65^O C (Operating)
Shock:
MIL-STD-202 Method 213, Condition D (500G Non Operating)
Vibration:
MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Humidity:
Moisture Seal Available
MTBF:
7.3 Million Hours ( MIL-HDBK-217F Fixed, 25^O C, <1 Cycle per hour)
RF Power Handling
3000
800
400
200
Standard _{SMA Connectors}
80
40
10
0.1
1.0
4.0
Frequency GHz
10 18
Specifications
DC-6 GHz 6-12 GHz 12-18 GHz
VSWR (max)
Insertion Loss (min)
Isolation (max)
1.25:1
0.20 dB
70.0 dB
1.40:1
0.40 dB
60.0 dB
1.50:1
0.50 dB
60.0 dB
Typical Performance
15
25
0.01
0.0
0.4
Frequency GHz
0.01
Frequency GHz
18.0
60
70
80
90
18.0
Specifications subject to change without notice.
www.rfswitches.com
email: [e-mail]
Tel: [phone]
8
01/2004