CC1100 Datasheet, PDF (1/70 Pages) List of Unclassifed Manufacturers – CC1100 Single Chip Low Cost Low Power RF-Transceiver

Chipcon
SmartRF ^® CC1100
CC1100 Single Chip Low Cost Low Power RF-Transceiver
Applications
• Ultra low power UHF wireless transceivers
• 315/433/868 and 915MHz ISM/SRD band
systems
• AMR – Automatic Meter Reading
• Consumer Electronics
• RKE – Two-way Remote Keyless Entry
Product Description
The CC1100 is a low cost true single chip UHF
transceiver designed for very low power
wireless applications. The circuit is mainly
intended for the ISM (Industrial, Scientific and
Medical) and SRD (Short Range Device)
frequency bands at 315, 433, 868 and
915MHz, but can easily be programmed for
operation at other frequencies in the 300-
348MHz, 400-464MHz and 800-928MHz
bands.
The RF transceiver is integrated with a highly
configurable baseband modem. The modem
supports various modulation formats and has
a configurable data rate up to 500kbps.
Performance can be increased by enabling a
Forward Error Correction option, which is
integrated in the modem.
CC1100 provides extensive hardware support
for packet handling, data buffering, burst
transmissions, clear channel assessment, link
quality indication and wake on radio.
The main operating parameters and the 64-
byte transmit/receive FIFOs of CC1100 can be
controlled via an SPI interface. In a typical
system, the CC1100 will be used together with a
Key Features
• Small size (QLP 4x4mm package, 20 pins)
• True single chip UHF RF transceiver
• Frequency bands: 300-348MHz, 400-
464MHz and 800-928MHz
• High sensitivity (–110dBm at 1.2kbps, 1%
packet error rate)
• Programmable data rate up to 500kbps
• Low current consumption (15.6mA in RX,
2.4kbps, 433MHz)
• Programmable output power up to
+10dBm for all supported frequencies
• Excellent receiver selectivity and blocking
performance
• Low power telemetry
• Home and building automation
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless sensor networks
microcontroller and a few additional passive
components.
CC1100 is based on Chipcon’s SmartRF^®04
technology in 0.18µm CMOS.
• Very few external components: Totally on-
chip frequency synthesizer, no external
filters or RF switch needed
• Programmable baseband modem
• Ideal for multi-channel operation
• Configurable packet handling hardware
• Suitable for frequency hopping systems
due to a fast settling frequency synthesizer
• Optional Forward Error Correction with
interleaving
• Separate 64-byte RX and TX data FIFOs
• Efficient SPI interface: All registers can be
programmed with one “burst” transfer
Chipcon AS
SmartRF^® CC1100 Preliminary Data Sheet (rev. 1.0) 2005-04-25
Page 1 of 68