CAP-AVX-GX02-001 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – surface mount chip capacitor model

surface mount chip capacitor model
Model Features
Land pattern (pad) scalable
Substrate scalable
Broadband (DC to 65 GHz)
Equivalent circuit topology
Accurate effective series resistance
DC blocking capacitor
Developed for microstrip interconnects
CAP-AVX-GX02-001
DC Block
0402 Body Style
Model Description
CAP-AVX-GX02-001 is a substrate scalable model for the AVX GX02ZZ104MAT2 (0.1uF) ultra broad band
capacitor. The model is for use with microstrip applications and accounts for substrate (or printed circuit
board) related parasitic effects. Substrate height, dielectric constant, loss tangent, interconnect metal thick-
ness, component tolerance, pad width, pad length, and pad gap are model input parameters. Effective se-
ries resistance (ESR) was measured to 1GHz and incorporated into the model. A Sim_mode switch allows
pad stack effects to be disabled. This model has been validated to 65 GHz on a 5 mil Alumina substrate,
and to lower frequencies using additional printed circuit board materials (see Technical Notes).
Substrate scaling
Legend: 4mil Rogers 4350B, +60mil Rogers 4003, 5mil Alumina, Lines - Model, Symbols - Measured data. Measured data
stops at highest valid frequency for each substrate (4 mil - 30 GHz, 60 mil - 8 GHz, 5 mil Alumina - 65 GHz).
Note: The pad dimensions used for the plots are: PADL = 15.5mil, PADW = 28.0mil, PADG = 16.0mil
www.modelithics.com [e-mail] Rev. 100714 © 2010