BPS200 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Standby Supply Module

BIAS Power Technology, Inc.
BIAS Standby Supply Module
BPS200 Series
The BPS200 Standby Power Supply Module is an ideal replacement for current standby power
applications in appliances and consumer electronics. This low-cost supply provides up to two watt of
output power, nominal output of 6, 12 or 14 VDC (Vo), and an additional regulated output of 3.3, 5.0 or
12.0 VDC (Vr) to maintain standby functions such as powering an LED, microprocessor or remote
control sensor. Incorporating a custom integrated circuit into a small package, the BIAS Standby Module
provides an immediate “drop-in” solution, requiring no additional external components.
Features
Low Cost
Single Component Solution
Quick Time-To-Market
Universal Input (85 to 265 VAC)
Small Size
Operating Specifications
(@120VAC / 60 Hz / 25ºC / 12VDC Vo unless otherwise specified)
Electrical
Input Voltage Range
Output Power
Efficiency
Output (Vo)
Regulation Vo
Ripple Vo (@120 Hz)
Regulated Output (Vr)
Regulation Vr
Ripple Vr (@120 Hz)
No-load Consumption
Isolation
Thermal
Operating Temperature
Operating Relative Humidity
Storage Temperature
Mechanical
Package Size
(L x W x H)
Safety
Safety Compliance ¹
EMI Emissions ¹
EFT/B Compliance ¹
85 to 265 VAC (50/60Hz)
2.0 W max
70% nom.
6, 12, 14 VDC nom.
+/- 5% (options B, C)
1V
3.3, 5.0, 12.0 VDC (option C)
+/- 0.1% (option C)
30 mV (option C)
20 mW typical
3000 VAC
-10 to 85º C
20 – 90% RH
-40 to 105º C
TBD
UL1950 / EN60950 (VDE)
EN 55011 / FCC Part 15-B
IEC 1000-4-4 Level 4 ²
1 _{Certification pending}
2 _{Utilizing external TVS device}
Specifications subject to change
Option A: Constant Power
Lowest cost solution, best applied
in constant load applications.
Option B: Demand Power
Designed for variable or intermittent
load applications. Power is available
upon demand and adjustable up to
two watts.
Option C: Demand Power
with Voltage Regulation
Provides dual isolated outputs for
applications requiring a regulated
output (Vr ±0.1%) in addition to the
standard unregulated output.
Rev. 7/18/02, Page 1 of 2
BIAS Power Technology, Inc., 414 South Vermont Street, Palatine, Illinois 60067 USA
Phone: [phone] USA, 847-991-8516; Fax: [phone], www.biaspower.com