AZ692 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 10 AMP MINIATURE POWER RELAY

`
AZ692/AZ693
10 AMP MINIATURE
POWER RELAY
FEATURES
Isolation spacing greater than 8mm
Dielectric strength 4000 Vrms coil to contact
Approvals/Standards include UL, CSA,VDE, IEC, CEE,
SEMKO
Single pole – Forms A, B and C available
10A switching
Life expectancy to 30 million operations
Epoxy sealed version for automatic wave soldering and
cleaning
UL file E44211 ; CSA file LR85091 ; VDE
4120-4940-4002/A1
CONTACTS
Arrangement
Ratings
UL Rating
Material
Resistance
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Resistive load:
Max switching power : 300W or 2500VA
Max switched current : 10A ; 64A for 2ms
Max switched voltage : 150* VDC or 380VAC
10A at 24VDC or 115VAC
0.25HP 120VAC motor load
10A at 250VAC
B300 pilot duty
* If switching voltage is greater than 30VDC, special precautions
must be taken. Please consult the factory.
Silver cadmium oxide
<30 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Max Temperature
Standard coil 337mW
Sensitive coil 234mW
1.9W at 20°C ambient
1.4W at 40°C ambient
Standard 40°C at nominal coil voltage
Sensitive 26°C at nominal coil voltage
110°C
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min)
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Weight
Minimum operations
30 million operations
1x10⁵ at 10A, 30VDC or 115VAC
2x10⁵ at 8A, 250VAC
6ms at nominal coil voltage
2ms at nominal coil voltage
(with no coil suppression)
4000 Vrms coil to contact
1000 Vrms between open contacts
10,000 megohms min at 500VDC, 20°C,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
Standard -55°C to 70C
Sensitive -55°C to 80C
Both -55°C to 110C
0.062” DA at 10 – 55 Hz
20g
PBT Polyester
Tinned copper alloy, PC
17 grammes
NOTES
1. All values at 20°C
2. Relay may pull in with less than ‘Must Operate’ value
3. PCB layout viewed towards terminals
4. Specifications subject to change without notice
5. Unsealed relays should not be dip cleaned
Logistic Design (UK) Limited
Unit 3 Eagle Centre Way, Sedgwick Road
Luton LU4 9US, United Kingdom
Tel [phone]
Fax [phone]
www.zettlerrelay.com
[e-mail]
LDZR201000