AZ10EL89 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – ECL/PECL Coaxial Cable Driver

AZ10EL89
ARIZONA MICROTEK, INC.
ECL/PECL Coaxial Cable Driver
FEATURES
• 375ps Propagation Delay
• 1.6V Output Swing
• Internal Input Pulldown Resistors
• Operating Range of 4.2V to 5.7V
• Direct Replacement for ON Semiconductor
MC10EL89
• Transistor Count = 29 devices
DESCRIPTION
PACKAGE AVAILABILITY
PACKAGE
SOIC 8
SOIC 8 T&R
SOIC 8 T&R
PART NO.
AZ10EL89D
AZ10EL89DR1
AZ10EL89DR2
MARKING
AZM10EL89
AZM10EL89
AZM10EL89
The AZ10EL89 is a differential fanout gate specifically designed to drive coaxial cables. The device is
especially useful in Digital Video Broadcasting applications. For this application, since the system is polarity free,
each output can be used as an independent driver. The driver has a voltage gain of approximately 40 and produces
an output swing twice as large as standard ECL output. When driving a coaxial cable, proper termination is required
at both ends of the line to minimize signal loss. The 1.6 V output swing allows for termination at both ends of the
cable, while maintaining the required 800 mV swing at the receiving end of the cable. Because of the larger output
swings, the device cannot be terminated into the standard V_CC -2.0V. All of the DC parameters are tested with a
50Ω to V_CC -3.0V load. The driver accepts a standard differential ECL input and can run off of the Digital Video
Broadcast standard -5.0V supply. Under open input conditions (pulled to V_EE) internal input clamps will force the
Qn output LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
PIN DESCRIPTION
PIN
D, D¯
Q0, Q¯¯0,Q1, Q¯¯1
V_CC
V_EE
FUNCTION
Data Inputs
Data Outputs (1.6V_PP)
Positive Supply
Negative Supply
Q0 ¹
Q0 2
Q1 ₃
Q1 ₄
8 V_CC
7D
6D
5 V_EE
1630 S. STAPLEY DR., SUITE 125 • MESA, ARIZONA 85204 • USA • [phone] • FAX [phone]
www.azmicrotek.com