AZ100EL16VS Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – ECL/PECL Differential Receiver with Variable Output Swing

AZ100EL16VS
ARIZONA MICROTEK, INC.
ECL/PECL Differential Receiver with Variable Output Swing
FEATURES
• 250ps Propagation Delay
• High Bandwidth Output Transitions
• 75kΩ Internal Input Pulldown Resistors
• Functionally Equivalent to ON
Semiconductor MC100EL16
• Variable Output Swing
• Available in a 3x3mm MLP Package
PACKAGE AVAILABILITY
PACKAGE
MLP 8
MLP 8 T&R
MLP 8 T&R
SOIC 8
SOIC 8 T&R
SOIC 8 T&R
TSSOP 8
TSSOP 8 T&R
TSSOP 8 T&R
PART NO.
AZ100EL16VSL
AZ100EL16VSLR1
AZ100EL16VSLR2
AZ100EL16VSD
AZ100EL16VSDR1
AZ100EL16VSDR2
AZ100EL16VST
AZ100EL16VSTR1
AZ100EL16VSTR2
MARKING
AZM16P
AZM16P
AZM16P
AZM100EL16VS
AZM100EL16VS
AZM100EL16VS
AZH16VS
AZH16VS
AZH16VS
DESCRIPTION
The AZ100EL16VS is a differential receiver with variable output swing. The EL16VS has functionality and
output transition times similar to the EL16, with an input that controls the amplitude of the Q/Q¯ outputs. Maximum
swing is achieved by leaving the V_CTRL pin open or tied to V_EE.
The operational range of the EL16VS control input, V_CTRL, is from V_BB (full swing) to V_CC (min. swing).
Simple control of the output swing can be obtained by a variable resistor between the V_BB and V_CC pins, with the
wiper driving V_CTRL. Typical application circuits and results are described in this Data Sheet.
The EL16VS provides a V_BB output for single-ended use or a DC bias reference for AC coupling to the device.
For single-ended input applications, the V_BB reference should be connected to one side of the D/D¯ differential input
pair. The input signal is then fed to the other D/D¯ input. The V_BB pin can support 1.0mA sink/source current.
When used, the V_BB pin should be bypassed to ground via a 0.01µF capacitor.
Under open input conditions (pulled to V_EE) internal input clamps will force the Q output LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
1630 S. STAPLEY DR., SUITE 125 • MESA, ARIZONA 85204 • USA • [phone] • FAX [phone]
www.azmicrotek.com