ATV12H075M2 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – variable speed drive ATV12 - 0.75kW - 1hp - 200..240V - 1ph - with heat sink

Product data sheet
Characteristics
Complementary
Supply frequency
Continuous output current
Maximum transient current
Speed drive output frequency
Nominal switching frequency
Switching frequency
Braking torque
Regulation loop
Motor slip compensation
Prospective line Isc
Output voltage
Electrical connection
Tightening torque
Insulation
Supply
Analogue input number
Analogue input type
10/8/2011
ATV12H075M2
variable speed drive ATV12 - 0.75kW - 1hp -
200..240V - 1ph - with heat sink
Main
Range of product
Product or component
type
Product destination
Product specific
application
Assembly style
Component name
EMC filter
Built-in fan
Network number of
phases
[Us] rated supply
voltage
Motor power kW
Motor power hp
Communication port
protocol
Line current
Speed range
Transient overtorque
Asynchronous motor
control profile
IP degree of protection
Altivar 12
Variable speed drive
Asynchronous motors
Simple machine
With heat sink
ATV12
Integrated
Without
Single phase
200...240 V (- 15...10 %)
0.75 kW
1 hp
Modbus
8.5 A, 0...1 kA
1...20
150...170 % of nominal motor torque
Sensorless flux vector control with PWM type motor
control signal
IP20 without blanking plate on upper part
50/60 Hz (+/- 5 %)
4.2 A at 4 kHz
6.3 A for 60 s
0...400 Hz
4 kHz
2...16 kHz adjustable
4...16 kHz with derating factor
Upto 150 % of nominal motor torque with braking resistor at high inertia
Upto 70 % of nominal motor torque without braking resistor
Adjustable
Factory-set with the speed loop stability and gain
Adjustable
Preset in factory
<= 1 kA
200...240 V triphase
L1, L2, L3, U, V, W, PA, PC terminal 3.5 mm² (AWG 12)
0.8 N.m
Electrical between power and control
Internal supply for logic inputs 24 V DC, voltage limits 20.4...27.6 V 100 mA for
overload and short-circuit protection
Internal supply for reference potentiometer 5 V DC, voltage limits 4.75...5.25 V 10
mA for overload and short-circuit protection
1
AI1 configurable current 0...20 mA, impedance 250 Ohm
AI1 configurable voltage 0...10 V, impedance 30 kOhm
AI1 configurable voltage 0...5 V, impedance 30 kOhm
1