AD5424 Datasheet, PDF (1/5 Pages) Analog Devices – 8-/10-/12-Bit, High Bandwidth, Multiplying DACs with Parallel Interface

TECHNICAL DATA
Quad 3-State Noninverting Buffers
High-Performance Silicon-Gate CMOS
IN74HCT125A
The IN74HCT125A is identical in pinout to the LS/ALS125. The
IN74HCT125A may be used as a level converter for interfacing TTL or
NMOS outputs to High Speed CMOS inputs.
The IN74HCT125A noninverting buffers are designed to be used
with 3-state memory address drivers, clock drivers, and other bus-
oriented systems. The devices have four separate output enables that are
active-low.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA
ORDERING INFORMATION
IN74HCT125AN Plastic
IN74HCT125AD SOIC
T_A = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 14 =V_CC
PIN 7 = GND
FUNCTION TABLE
Inputs
A OE
H
L
L
L
X
H
Output
Y
H
L
Z
X = don’t care
Z = high impedance
123