1VB1 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – General Purpose RFI Power Line Filters General Purpose for High Impedance Loads at Low Cost

B Series
General Purpose RFI Power Line Filters
General Purpose for High Impedance
Loads at Low Cost
UL Recognized
CSA Certified
VDE Approved
SEV Approved*
B Series
The B series RFI power line filters are general purpose
common-mode filters effectively providing RFI control
of line-to-ground noise in a small size at low cost.
These filters are designed to meet a wide variety of
electronic and electrical applications and are available
in a broad selection of current ratings and termination
styles. The EB models meet the very low leakage current
requirements of SEV, VDE portable equipment,
and (120 Volt) UL544 nonpatient medical equipment.
Electrical Schematic
Resistor location for reference only.
B
14
VB1/EB1
VB3/EB3
10VB6/20VB6
Specifications
VB Models
Maximum leakage current,
each line-to-ground
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
.4 mA
.7 mA
EB Models
.21 mA
.36 mA
Hipot rating (one minute):
line-to-ground
line-to-line
2250 VDC
1450 VDC
Operating frequency:
50/60 Hz
Rated voltage:
120/250 VAC
Rated current:
1VB/1EB
2VB/2EB
3VB/3EB
5VB/5EB
10VB/10EB
10VB6
20VB/20EB
30VB6
@ 120 VAC
1A
2A
3A
5A
10A
10A
20A
30A
@ 250 VAC
1A
2A
3A
5A
8A
8A
16A
25A
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current
Frequency–MHz
Rating
.15 .5 1 5 10 30
VB Models
1A, 3A
2A, 5A, 10A, 20A, 30A
EB Models
1A, 3A
2A, 5A, 10A, 20A
15 30 38 50 50 50
7 20 25 40 45 48
15 29 35 45 45 48
7 19 23 34 37 42
*EB models only.
Libertyville, IL [phone]