E5XC Datasheet, PDF (97/112 Pages) Omron Electronics LLC – Digital Temperature Controller

E5@C/E5@C-T
E5†C-T
This diagram shows all of the setting levels. To move to the advanced function setting level and calibration level, you must enter passwords. Some
parameters are not displayed depending on the protect level setting and the conditions of use.
Starting in manual mode
Power ON
Level changes
automatically.
Press O and M Keys
for at least 1 s.
Protect Level
Used to set protection
for operations.
Press O and M Keys
for at least 3 s.^*2
Manual Control
Level
Used to set the MV
manually.
Press O or
S Key for at least 1 s.^*1
Press O Key for at
least 3 s while a-m is
displayed.^*2
Press S Key
for at least 1 s.^*1
Press S Key.^*3
Operation Level
Used for SPs and other
basic settings and
monitoring.
Press O Key
for less than 1 s.
Program Setting
Level
Parameter and
segment settings for
all programs
Press O Key
for less than 1 s.
Press O
Key for at
least 1 s.
Press O Key
for less than 1 s.
PID Setting
Level
Parameters for all PID
sets (e.g., PID
constants)
Press O Key
for less than 1 s.
Adjustment Level
Adjustment parameters
(e.g., PID constants for
current PID set)
Press O Key for
at least 3 s.^*2
Press S Key.^*3
Monitor/Setting
Item Level
Used to display
specified monitor and
setting items.
Control stops.
Initial Setting Level
Used to set the input type
and other basic settings.
Press O Key for less
than 1 s (only models
with communications).
Communications
Setting Level
Communications settings
Release protection and then
enter the password (−169) for
the amoV (Move to Advanced
Press O Key for at
least 1 s.
Function Setting Level)
parameter.
Advanced Function
Setting Level
Advanced settings
Enter the password (1201)
while cmov (Move to
Calibration Level
parameter) is displayed.
Calibration Level
*1 Set the PF Setting parameter to a-m (Auto/Manual).
*2 The No. 1 display will flash when the keys are pressed for 1 s or longer.
*3 Set the PF Setting parameter to pfdp (monitor/setting items).
97