SMHF Datasheet, PDF (9/12 Pages) List of Unclassifed Manufacturers – DC/DC CONVERTERS 28 VOLT INPUT

DC/DC CONVERTERS
SMHF SERIES
SINGLE AND DUAL
15 WATT
Squared corner and dot on top
of case indicate pin one.
CASE G
BOTTOM VIEW
Flanged package
See Figure 24
for pin configuration
2.005 max
(50.93)
1.130 max
(28.70)
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover MHF+ Series and FMH Filter
Kovar/Nickel
SMHF
Cold Rolled Steel/Nickel
Pins #52 alloy (all cases)
compression glass seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.2) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
Flange Thickness: 0.047 (1.19)
FIGURE 23: CASE G MAXIMUM DIMENSIONS
BOTTOM VIEW CASE G1
Flanged cases: Designator "F" required in Case Option position of model number
SMHF Series Single and Dual
Projection Weld
0.960
(24.38)
0.030 dia.
(0.76)
0.560
(14.22)
Squared corner and dot on top
of case indicate pin one.
1
2345
0.128 dia
(3.25)
0.160
(4.06)
0.000
8
7
6
FIGURE 24: CASE G1
41