HC49S-6-30-50-60-30-ATF Datasheet, PDF (8/8 Pages) List of Unclassifed Manufacturers – General, industrial, microcontrollers

Crystals
Specification Table
Nominal Frequency Range
Vibration Mode
Frequency Tolerance at 25°C
Temperature Stability
Operating Temperature Range
Storage Temperature Range
Load Capacitance
Equivalent Series Resistance
Shunt Capacitance
Drive Level
Insulation Resistance
Aging
ESR Table
Case
Frequency
10 - 13.99 MHz
14 - 30 MHz
30 - 60 MHz
Vibration
Mode
F
F
3
10 to 30 MHz
30 to 60 MHz
Fundamental (AT)
3rd Overtone (AT)
±20, ±30 or ±50 ppm
±30 or ± 50 ppm
-20°C to +70°C
-30°C to +80°C
8 pF to 32 pF or series
See ESR table below
7 pF maximum
100 µW maximum
500 MΩ minimum at 100 V dc
±5 ppm per year
DX-57
Ω Maximum
60
50
100
Part Number Table
Case
DX57
DX57
DX57
DX57
DX57
DX57
DX57
DX57
Frequency
(MHz)
10
11.0592
12
18.432
19.6608
24
27
32
Frequency
Tolerance
(PPM)
30
30
30
30
30
30
30
30
Temperature
Stability
(PPM)
Temperature
Range
60 = -10 to +60
70 = -20 to +70
50
70
50
70
50
70
50
70
50
70
50
70
50
70
50
70
Load
Capacitance
pf
00 = Series
20
20
20
20
20
20
20
20
Vibration Mode
AT Cut
F = Fund
0.3 Overtone
ATF
ATF
ATF
ATF
ATF
ATF
ATF
AT3
Ant Part
Number
XTL-7024
XTL-7026
XTL-7029
XTL-7036
XTL-7040
XTL-7047
XTL-7052
XTL-7056
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <8>
17/04/12 V1.1