ADS929 Datasheet, PDF (8/8 Pages) List of Unclassifed Manufacturers – 14-Bit, 2MHz, Low-Power Sampling A/D Converters

ADS-929
®
®
24-Pin DDIP
Versions
ADS-929MC
ADS-929MM
ADS-929/883
ADS-919MC
ADS-919MM
MECHANICAL DIMENSIONS INCHES (mm)
1.31 MAX.
(33.27)
24
1
13
0.80 MAX.
(20.32)
12
Dimension Tolerances (unless otherwise indicated):
2 place decimal (.XX) ±0.010 (±0.254)
3 place decimal (.XXX) ±0.005 (±0.127)
Lead Material: Kovar alloy
Lead Finish: 50 microinches (minimum) gold plating
over 100 microinches (nominal) nickel plating
0.235 MAX.
(5.969)
0.100 TYP.
(2.540)
1.100
(27.940)
PIN 1 INDEX
0.200 MAX.
(5.080)
0.190 MAX.
(4.826)
0.018 ±0.002
(0.457)
24-Pin
24
Surface Mount
Versions
ADS-929GC
ADS-929GM
1
ADS-919GC
ADS-919GM
0.190 MAX.
(4.826)
0.100
(2.540)
0.040
(1.016)
SEATING
PLANE
0.025
(0.635)
+0.002
0.010 –0.001
(0.254)
0.600 ±0.010
(15.240)
0.100
(2.540)
1.31 MAX.
(33.02)
13
0.80 MAX.
(20.32)
12
Dimension Tolerances (unless otherwise indicated):
2 place decimal (.XX) ±0.010 (±0.254)
3 place decimal (.XXX) ±0.005 (±0.127)
Lead Material: Kovar alloy
Lead Finish: 50 microinches (minimum) gold plating
over 100 microinches (nominal) nickel plating
0.020 TYP.
(0.508)
PIN 1
INDEX
0.060 TYP.
(1.524)
0.130 TYP.
(3.302)
0.015
(0.381)
MAX. radius
for any pin
MODEL
NUMBER
ADS-929MC
ADS-929MM
ADS-929/883
ADS-929GC
ADS-929GM
ADS-919MC
ADS-919MM
ADS-919GC
ADS-919GM
OPERATING
TEMP. RANGE
0 to +70°C
–55 to +125°C
–55 to +125°C
0 to +70°C
–55 to +125°C
0 to +70°C
–55 to +125°C
0 to +70°C
–55 to +125°C
0.100 TYP.
(2.540)
0.040
(1.016)
0.100
(2.540)
0.020
(0.508)
0.010 TYP.
(0.254)
ORDERING INFORMATION
ANALOG
INPUT
Bipolar (±5V)
Bipolar (±5V)
Bipolar (±5V)
Bipolar (±5V)
Bipolar (±5V)
Unipolar (0 to +10V)*
Unipolar (0 to +10V)*
Unipolar (0 to +10V)*
Unipolar (0 to +10V)*
ACCESSORIES
ADS-B919/929
HS-24
Evaluation Board (without ADS-929)
Heat Sinks for all ADS-919/929 DDIP models
Receptacles for PC board mounting can be ordered through
AMP Inc. Part #3-331272-8 (Component Lead Socket), 24 required.
For MIL-STD-883 product specifications, contact DATEL.
* For information, see ADS-919 data sheet.
®
®
ISO 9001
REGISTERED
DS-0287B
11/96
DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151
Tel: [phone] [phone] Fax: [phone]
Internet: www.datel.com E-mail:[e-mail]
Data Sheet Fax Back: [phone]
DATEL (UK) LTD. Tadley, England Tel: [phone]
DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: [phone]
DATEL GmbH München, Germany Tel: [phone]
DATEL KK Tokyo, Japan Tel: [phone], Osaka Tel: [phone]
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein
do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.