NET2270 Datasheet, PDF (62/90 Pages) List of Unclassifed Manufacturers – USB 2.0 Interface Controller

Specification
NET2270 USB Interface Controller
8.6.4 (Address 08h; EP_TRANSFER0) Transfer Count Register (Byte 0)
Bits Description
7:0 EP_TRANSFER[7:0]. For IN endpoints, this field determines the total number of
bytes to be sent to the host. This field should be written before any packet data is
written to the buffer. When the count reaches zero, any remaining data in the buffer
is validated. Writing a zero to this register when EP_TRANSFER1 and
EP_TRANSFER2 have a value of 0 validates the buffer. Note that validation takes
about 100 nsec.
Read
Yes
Write
Yes
Default
Value
0
For OUT endpoints, this counter is cleared when the NAK OUT packets bit is
cleared (EP_RSPCLR bit 7). This counter is incremented for every byte read from
the packet buffer. If 16-bit mode is selected and only one of the two bytes is valid,
the counter will only increment by 1.
8.6.5 (Address 09h; EP_TRANSFER1) Transfer Count Register (Byte 1)
Bits Description
7:0 EP_TRANSFER[15:8].
Read Write
Yes
Yes
Default
Value
0
8.6.6 (Address 0Ah; EP_TRANSFER2) Transfer Count Register (Byte 2)
Bits Description
7:0 EP_TRANSFER[23:16].
Read Write
Yes
Yes
Default
Value
0
______________________________________________________________________________ 62
 NetChip Technology, Inc., 2003
335 Pioneer Way, Mountain View, California 94041
TEL [phone] FAX [phone]
http://www.netchip.com
Rev 3.6, April 17, 2003