English
Language : 

RGE300 Datasheet, PDF (6/11 Pages) List of Unclassifed Manufacturers – Selection Guide and Product Data
RGE
Radial Leaded
Electrical characteristics (25°C)
RGE Product Data
Now that you have selected your RGE device, please review the
device’s characteristics in this section to verify that the device will
perform as required.
Part
IH
IT
Number
(A)
(A)
RGE300
3.0
5.1
Max. time
to trip (s)
Pd
at 5 x IH
(W)
2.0
2.3
Initial
resistance
R min.
(Ω)
0.034
New RGE400
4.0
6.8
3.5
2.4
0.020
RGE500
5.0
8.5
3.6
2.6
0.014
New RGE600
6.0
10.2
5.8
2.8
0.009
RGE700
7.0
11.9
8.0
3.0
0.006
New RGE800
8.0
13.6
9.0
3.0
0.005
RGE900
9.0
15.3
12.0
3.3
0.004
New RGE1000
10.0
17.0
12.5
3.3
0.003
RGE1100
11.0
18.7
13.5*
3.7
0.003
4
New RGE1200
New RGE1400
12.0
14.0
20.4
23.8
16.0
20.0
4.2
0.002
4.6
0.002
IH = Hold current—maximum current at which the device will not trip at 25°C.
IT = Trip current—minimum current at which the device will always trip at 25°C.
Pd = Typical power dissipation—typical amount of power dissipated by the device when in tripped state in 25°C still air.
R min. = Minimum device resistance at 25°C prior to tripping.
R max. = Maximum device resistance at 25°C prior to tripping.
R1 max. = Maximum device resistance at 25°C measured 1 hour post trip.
* Device tested at 60 A.
Physical characteristics
Post-trip
resistance
R1 max .
(Ω)
0.105
0.063
0.044
0.030
0.021
0.018
0.015
0.012
0.010
0.009
0.008
Lead material
Soldering characteristics
Insulating material
Agency recognitions
RGE300—RGE1100: Tin lead-plated copper, 20 AWG, ∅ 0.81 mm/0.032 in
RGE1200—RGE1400: Tin lead-plated copper, 18AWG, ∅ 1.0 mm/0.04 in
Solderability per ANSI/J-STD-002
Solder heat withstand per IEC 68-2-20:
RGE300, Test Tb; should be soldered to the printed circuit in less than
4 seconds at maximum temperature of 260°C ± 5°.
RGE500—RGE1400, Test Tb; can withstand 10 seconds at 260°C ±5°.
Cured, flame-retardant epoxy polymer; meets UL 94V-0 requirements
Note: Devices are not designed to be placed through a reflow process.
CSA
TU¨ V
UL
134 RGE Devices
File # CA 78165C
Certificate # R9677540
File # E74889
Raychem Circuit Protection Devices