OMR9601 Datasheet, PDF (6/9 Pages) List of Unclassifed Manufacturers – 1 M Rad (Si), ULTRA LOW DROPOUT POSITIVE LINEAR REGULATOR

Vin
100uF 16V
Tantalum
Application Schematic
Vin
Vout
OMR9601
SHDN
GND
1.0uF
Ceram ic
X7R
Ground
OMR9601
Vout
220uF 6.3V
Tantalum
In order to maintain regulation and stability specified additional input and output bulk
capacitors are recommended. Capacitors recommended above should be low ESR tantalums
with tolerances of ± 20% max. Internal to the product are a 4.7uF input capacitor and a
4.7uF output capacitor in parallel with a 0.33uF ceramic capacitor.
Shutdown: The regulator can be shutdown by applying a voltage > 1.6V to pin 4. The
regulator will restart when the SHDN pin is pulled below the shutdown threshold of 1.0V. If
remote shutdown is not required, pin 4 should be connected to GND to insure a safe “off”
state.
Rev D, 02/14/2002
205 Crawford Street • Leominster MA 01453 • Phone: [phone] • Fax: [phone] • www.omnirel.com