NRF0433 Datasheet, PDF (6/14 Pages) List of Unclassifed Manufacturers – Single chip 433MHz RF Transceiver

PRODUCT SPECIFICATION
nRF0433 Single chip RF Transceiver
Power up in receive mode
During power up in receive mode, the receiver can not receive data until the VDD pins
have been stable at 5V (±5%) for at least 75ms (t_on). If an external reference oscillator
is used (figure 4), the receiver may receive data after 7.5ms.
Switching TX ↔ RX
The receiver may not receive data before the TXEN-input has been low for at least
3ms.
No data should be transmitted before the TXEN-input has been high for at least 3ms.
Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway -
Revision: 3.2
Page 6 of 14
Phone [phone] - Fax [phone]
February 2000