MLX90720 Datasheet, PDF (6/12 Pages) List of Unclassifed Manufacturers – One Button Timer

Other configurations
In configuration 2, the countdown of the last minute
is not displayed in seconds.
The restore memory option (in One Button Timer ver-
sion or Two Button Timer version) and the second
fast increment option can be selected. Thus, except
for the display of the last minute countdown, the
functional behavior remains the same as in configu-
ration 1.
In configuration 3, the countdown of the last minute
is displayed in seconds. The least significant digit is
variable. For the first 10 minutes, the LSD is 0.5 min-
utes, above 10 minutes the LSD is 1 minute. This
can also be displayed on the LCD with one additional
character. This means that both programming, count-
down and restore are done with a resolution of 0.5
minutes for the first 10 minutes.
Note: also the first minute is programmed in steps of
0.5 minutes, while during countdown it is displayed in
seconds.
The restore memory option (in One Button Timer ver-
sion or Two Button Timer version) and the second
fast increment option can be selected.
All other details are as in configuration 1.
Configuration 4 has the same functionality as con-
figuration 1, but is counting seconds instead of min-
utes. This means that the LCD is always displaying
seconds, programming and countdown is always in
steps of 1 second, and the maximum time that can
be programmed is 99 seconds.
MLX90720
One Button Timer
MLX90720 One Button Timer
Page 6
Rev 1.0 30/Nov/00