LH01APTAI003 Datasheet, PDF (6/6 Pages) List of Unclassifed Manufacturers – LED Heat Dissipation Substrate

TA-I Technology Inc.
Approval Specification Sheet
for TA-I
Doc. No
Issued date
Page
TAI003 Series
2012/01/18
6 /6
5. Reliability test
No.
Item
Parameter
1. Temp. : RT
1
Adhesion test
2. Tool : 3M-600
3. Time : adhesive 30 seconds
4. Angle : 180°
1. Temp.：235±5℃
2
Solderability
2. Time：5±1sec
3. solder bath composition：
(Ag/Sn/Cu=3/96.5/ 0.5%)
1. Temp.：260℃
3
Reflow
2. Times：3 cycles
Specification
 The exterior must be no
separate
 Coverage＞90%
 The exterior must be no
separate, crack and warpage
 Maintain the electrical function.
6. Notices
(1)When inspection, packaging and handling:
Must wear gloves and masks when inspect products.
Must wear latex gloves before unpacking products
Must avoid vibration, shock and stress etc. when carry products.
(2) Storage conditions:
Store under 25℃±5℃、50%±10RH when sealed.
The expiration date is less than 3 months when sealed.
Store under 25℃±5℃、50%±10RH when unsealed.
Please store unsealed package in airtight containers and used up within 3 days.
(3)Before wire bonding：
Please clean and preheat before wire bonding.
TA-I TECHNOLOGY CO., LTD