DEM16101H Datasheet, PDF (6/15 Pages) List of Unclassifed Manufacturers – LCD MODULE

DEM 16101 H
6.1 PCB DRAWING AND DESCRIPTION
Product Specification
J3 ^{J6 R7 R8}
R5
R4
J4
R3
J5
R2
R1
J2 _J1
R6
DEM16101
DESCRIPTION: (Not applicable for this version)
6-1-1.The polarity of the pin 15 and the pin 16:
symbol
J2,J4
symbol
state
Each solder-bridge
J3,J5
Each open
J2, J4
------
J3,J5
Each solder-bridge
------
Each open
6-1-2. The metal-bezel should be on ground when the J1 is solder-Bridge.
6-1-3.The LED resistor should be bridged when the J6 is solder-Bridge.
6-1-4.The R7 and the R8 are the LED resistor.
6.2 Example application (Not applicable for this version)
6-2-1. The LED resistor should be bridged as following.
R8
R7
LED Polarity
15 Pin
16 Pin
Anode
Cathode
Cathode
Anode
J6
6-2-2. The 15 pin is the anode and the 16 pin is the cathode as following.
J3
J5
J2
J4
6-2-3.The 15 pin is the cathode and the 16 pin is the anode as following.
J5
J3
J2
J4
6-2-4. The metal-bezel is on ground as following.
J1
Version:5
4