3FTL600 Datasheet, PDF (6/6 Pages) List of Unclassifed Manufacturers – through-hole or SMD

multimec^{® technical specifications}
Electrical Specifications
Contact resistance
Insulation resistance
Recommended load
Contact bounce
Mechanical Specifications
Standard actuation force (switch)
Max. actuation force without cap
Key travel (switch)
Life time (switch)
Temperature Range
Working temperature
Storage temperature
Soldering IEC 68-2-20
Environmental Endurance IEC-68-2-3
Temperature
Humidity
Duration
Temperature Cycling IEC 68-2-14
Temperature limit
Number of cycles
Exposure time at each temperature
Recovery time before measurements
Sealing IEC 529
Cleaning
Material Specifications - Switches
Housing
Actuator
Sealing + spring
Contact spring
Fixed Contacts
Terminals
Material Specifications - Caps & Bezels
Material
ABS Standard
Polycarbonate
LCP
PPS
Polyamide
Legends Adhesion
Specifications are subject to change without notice
Low Temperature Versions
Silver
Gold
High Temperature Versions
Silver
Gold
<30 m - typically 10m
>10M
0.5-50mA 24VDC
<2mS - typically 0.5mS
0.5µ-50mA 24VDC
0.5-50mA 24VDC
0.5µ-50mA 24VDC
3.0N typ.
100N for 10 sec.
1 mm
>10.000.000 cycles
Min. -40ºC Max. +115 ºC
Min. -40ºC Max. +115 ºC
Wave -max. 260ºC for max. 10 sec., please r efer to
usage guidelines
Soldering iron - max. 350 ºC for max. 3 sec. Flux tight.
Min. -40ºC Max. +160ºC
Min. -40ºC Max. +160ºC
Infrared, vapour phase, wave
- max. 260ºC for max. 30 sec.
Soldering iron - max. 350ºC for max. 3 sec. Flux tight.
+40ºC
93% RH
56 Days
Min. -55ºC - Max. +85ºC
200
10 min.
16 hrs.
IP-67
Standard methods such as freon and water
PBT UL94VO
PBT UL94VO
Silicone rubber
Stainless steel
+ 3µAg
SnCu + 2µNI + 3µAg
SnCu + 2µNI + 3µSnPb
Stainless steel
+ 3µAg + 1µAu
SnCu + 2µNI + 3µAg+1µ Au
SnCu + 2µNI + 3µSnPb
PPS UL94VO
PPS UL94VO
Stainless steel
+ 3µ Ag
SnCu + 2µ NI + 3µ Ag
SnCu + 2µNI + 3µSnPb
Stainless steel
+ 3µ Ag +1µAu
SnCu + 2µNI + 3µAg +1µ Au
SnCu + 2µNI + 3µSnPb
Parts
Temp limit
Standard parts except
the below mentioned
Max 65ºC
All lenses
Max. 85ºC
Actuator of 3E
1S, 2S
Max. 160ºC
Max. 160ºC
Actuator of Varimec , 1GA / 1GC Max. 160ºC
ISO Class.: 1/ ASTM Class.: 4B
DIN EN ISO 2409
UL rating
UL94HB
UL94V1
UL94VO
UL94VO
UL94VO
mec Industriparken 23 ^. P.o. Box 26 ^. DK-2750 Ballerup ^. Denmark
Tel.: [phone] ^. Fax: [phone] ^. E-mail: [e-mail] ^. www.mec.dk.