CC1100 Datasheet, PDF (54/70 Pages) List of Unclassifed Manufacturers – CC1100 Single Chip Low Cost Low Power RF-Transceiver

Chipcon
SmartRF ^® CC1100
0x17: MCSM1– Main Radio Control State Machine configuration
Bit Field Name
Reset R/W Description
7:6 Reserved
5:4 CCA_MODE[1:0]
3:2 RXOFF_MODE[1:0]
1:0 TXOFF_MODE[1:0]
3 (11)
0 (00)
0 (00)
R0
R/W Selects CCA_MODE; Reflected in CCA signal
Setting Clear channel indication
0 (00) Always
1 (01) If RSSI below threshold
2 (10) Unless currently receiving a packet
3 (11)
If RSSI below threshold unless currently
receiving a packet
R/W Select what should happen when a packet has been
received
Setting Next state after finishing packet reception
0 (00) IDLE
1 (01) FSTXON
2 (10) TX
3 (11) Stay in RX
R/W Select what should happen when a packet has been sent
(TX)
Setting Next state after finishing packet transmission
0 (00) IDLE
1 (01) FSTXON
2 (10)
3 (11)
Stay in TX (start sending preamble)
RX
Chipcon AS
SmartRF^® CC1100 Preliminary Data Sheet (rev. 1.0) 2005-04-25
Page 54 of 68