ADC-44D Datasheet, PDF (52/66 Pages) List of Unclassifed Manufacturers – Multi-Function Analogue Input/Output Card

Page 44
Numbering Systems
Appendix A
The following table shows how the three systems indicate successive numbers
Decimal
Base 10
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Binary
Base 2
00000
00001
00010
00011
00100
00101
00110
00111
01000
01001
01010
01011
01100
01101
01110
01111
10000
10001
10010
10011
10100
Hexadecimal
Base 16
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
Notice how the next higher column does not increment until the lesser one to its
right has overflowed.
Binary representation is ideally suited where a visual representation of a
computer register or data is needed. Each column is termed a BIT (from Binary
digIT). Only five Bits are shown in the above table. With larger numbers,
more Bits are required. Normally Bits are arranged in groups of eight termed
BYTES. By definition there are 8 BITS per BYTE. Each Bit (or column) has a
value. In the binary table above the rightmost or least significant column each
digit has a value of 1. Each digit in the next column has a value of 2, the next
4, then 8 and so on.
127-170
Blue Chip Technology Ltd.