SBB-4089 Datasheet, PDF (5/6 Pages) List of Unclassifed Manufacturers – 0.05-6 GHz, Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier

Application Schematic
V_S
RF in
1 uF 1200
pF
C_B
4
1
3
SBB-4089
C_B
2
L_C
C_B
Evaluation Board Layout
RF out
Mounting Instructions
1. Solder the copper pad on the backside of the device package to
the ground plane.
2. Use a large ground pad area with many plated through-holes as
shown.
3. We recommend 1 or 2 ounce copper. Measurement for this
datasheet were made on a 31 mil thick FR-4 board with 1
ounce copper on both sides.
SBB-4089 0.05-6 GHz Cascadable MMIC Amplifier
Application Circuit Element Values
Reference
Designator
C_B
L_C
Frequency (MHz)
500 to 3500
68pF
82nH 1008CS
Absolute Maximum Ratings
Parameter
Absolute Limit
Ma. Dvice Current (I_D)
Max Device Voltage (V_D)
Max. RF Input Power
100 mA
5.5 V
+12 dBm
Max. Operating Dissipated
Power
0.55 W
Max. Junction Temp. (T_J)
Operating Temp. Range (T_L)
Max. Storage Temp.
+150°C
-40°C to +85°C
+150°C
Operation of this device beyond any one of these limits may cause
permanent damage. For reliable continuous operation, the device
voltage and current must not exceed the maximum operating
values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D < (T_J - T_L) / R_TH, j-l T_L=T_LEAD
ESD Class 1C
Appropriate precautions in handling, packaging and testing
devices must be observed.
MSL (Moisture Sensitivity Level) Rating: Level 1
303 S. Technology Ct.
Broomfield, CO 80021
Phone: (800) SMI-MMIC
5
http://www.sirenza.com
EDS-103832 Rev D