|
MSK1900 Datasheet, PDF (5/6 Pages) M.S. Kennedy Corporation – HIGH PERFORMANCE, HIGH VOLTAGE VIDEO DISPLAY DRIVER | |||
|
◁ |
TYPICAL CONNECTION CIRCUIT
The connections shown above are for the MSK 1900 evaluation board. +Vcc should be connected to VCB through a
20⦠resister with a 15pF capacitor to ground. This will help to filter power supply noise and provide a stable voltage at VCB.
RP is an external component and must not be located near ground planes if possible. A high quality resistor such as Bradford
Electronics P/N FP10-200 is required for optimum response times.
5
Rev. B 9/99
|
▷ |