CP2103 Datasheet, PDF (5/18 Pages) List of Unclassifed Manufacturers – SINGLE-CHIP USB TO UART BRIDGE

CP2103
2. Absolute Maximum Ratings
Table 1. Absolute Maximum Ratings
Parameter
Conditions
Min
Typ
Max Units
Ambient temperature under bias
–55
—
125
°C
Storage Temperature
–65
—
150
°C
Voltage on any I/O Pin or RST with respect to GND
–0.3
—
5.8
V
Voltage on V_DD or V_IO with respect to GND
Maximum Total current through V_DD, V_IO, and GND
Maximum output current sunk by RST or any I/O pin
–0.3
—
4.2
V
—
—
500
mA
—
—
100
mA
Note: Stresses above those listed may cause permanent damage to the device. This is a stress rating only, and functional
operation of the devices at or exceeding the conditions in the operation listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods may affect device reliability.
3. Global DC Electrical Characteristics
Table 2. Global DC Electrical Characteristics
V_DD = 2.7 to 3.6 V, –40 to +85 °C unless otherwise specified.
Parameter
Conditions
Supply Voltage (V_DD)
Supply Voltage (V_IO)
Supply Current
Supply Current in Suspend
V_IO Supply Current
Specified Operating Temperature Range
V_DD = 3.3 V
V_DD = 3.3 V
VBUS = 0
V_DD = 0
V_IO = 3.0 V
Min
Typ
Max Units
3.0
3.3
3.6
V
1.8
3.3
V_DD
V
—
26
—
mA
—
330
—
µA
—
500
—
µA
–40
—
+85
°C
Preliminary Rev. 0.2
5