ATPG-L53C Datasheet, PDF (5/5 Pages) List of Unclassifed Manufacturers – ATPG-L53C

‰ MODEL : ATPG-L53C
7. Inspection Standards
7 - 1 In production line, 100% inspection for electro-optical characteristics should
be done on following 3 items.
- VF , IR , Iv
7 - 2 Outgoing inspection be done to the standards as below.
- MIL-STD-104D, S-3, AQL 1.0%
- Items: VF, IR, Iv, λp
8. Packing Standards
8 – 1.Taping :
Standard taping provided. Or user’s request.
8 – 2 Bulk Packing :
In one vinyl pack, 500 or 1,000 LEDs are inserted. Or user’s request.
9. Caution on usage
9 - 1 Be careful never to exceed , even momentarily, the absolute maximum ratings
specified in the data sheet.
9 - 2 ACROSENTEC will not be held responsible for any damage to the user that
may result from accidents or any other reasons during operation of the user such
as use in excess of the absolute maximum ratings, or not keeping the matters that
demand special attention.
9 - 3 Store and use where there is no corrosive gas.
9 - 4 The bending or cutting of the lead should be done in room temperature and no
force applied on the package.
Data subject to change.
Copyright ⓒ 2003 AcrosenTec Co.,Ltd, (www.AcrosenTec.com)