PCM5862E Datasheet, PDF (47/108 Pages) List of Unclassifed Manufacturers – All in one multi-media Pentium processor-based single board computer

Ethernet software configuration
The PCM-5862E/5862EL’s on-board Ethernet interface supports all
major network operating systems. To configure the medium type, to
view the current configuration, or to run diagnostics, do the
following:
1. Power the PCM-5862E/5862EL on. Ensure that the
RSET8139.EXE file is located in the working drive.
2. At the prompt type RSET8139.EXE and press <Enter>. The
Ethernet configuration program will then be displayed.
3. This simple screen shows all the available options for the
Ethernet interface. Just highlight the option you wish to change
by using the Up and Down keys. To change a selected item,
press <Enter>, and a screen will appear with the available
options. Highlight your option and press <Enter>. Each
highlighted option has a helpful message guide displayed at the
bottom of the screen for additional information.
4. After you have made your selections and are sure this is the
configuration you want, press ESC. A prompt will appear asking
if you want to save the configuration. Press Y if you want to
save.
The Ethernet Setup Menu also offers three very useful diagnostic
functions. These are:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen that shows the format and
result of any diagnostic tests undertaken.
Chapter 3 Software Configuration 39