GE863 Datasheet, PDF (45/69 Pages) List of Unclassifed Manufacturers – Telit GE863-QUAD / GE863-PY Hardware User guide

Telit GE863-QUAD / GE863-PY
Hardware User guide
1vv0300697, Rev. ISSUE#0, - 21/11/05
8.3Using the Alarm Output GPIO6
The GPIO6 pad, when configured as Alarm Output, is controlled by the GE863-QUAD module
and will rise when the alarm starts and fall after the issue of a dedicated AT command.
This output can be used to power up the GE863-QUAD controlling microcontroller or
application at the alarm time, giving you the possibility to program a timely system wake-up to
achieve some periodic actions and completely turn off either the application and the GE863-
QUAD during sleep periods, drammatically reducing the sleep comsumption to few μA.
In battery powered devices this feature will greatly improve the autonomy of the device.
8.4 Using the Buzzer Output GPIO7
The GPIO7 pad, when configured as Buzzer Output, is controlled by the GE863-QUAD module
and will drive with appropriate square waves a Buzzer driver.
This permits to your application to easily implement Buzzer feature with ringing tones or melody
played at the call incoming, tone playing on SMS incoming or simply playing a tone or melody
when needed by your application.
A sample interface scheme is included below to give you an idea of how to interface a Buzzer to
the GPIO7:
NOTE: To correctly drive a buzzer a driver must be provided, its characteristics depend on the
Buzzer and for them refer to your buzzer vendor.
Reproduction forbidden without Telit Communication written authorization – All Right reserved – Right of modification reserved page 45 of 69