YF0013 Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – 4 Tumbler Miniature Switchlocks

YF Series
4 Tumbler Miniature Switchlocks
02 PC THRU-HOLE
H
TERMINATIONS
07 SOLDER LUG WITH HOLE
WC WIRE LEAD
PC MOUNTING
YF45 Models
N (STD.) WITH NUT
Nut part number: 179090123
Black wire standard, other colors and
lengths available, consult Customer
Service Center. UL style 1015.
MOUNTING STYLE
Switch and Lock Assembly Instructions
PANEL MOUNTING
.472 DIA.
(11,99)
.420
(10,67)
Panel thickness:
.300 (7,62) max.
LOCK MUST BE IN PANEL
BEFORE ATTACHING
SWITCH BASE
SWITCH BASE
KEY SHOWN IN
POSITION ONE
ALIGN TAB WITH SLOT
AND SNAP TOGETHER
4 TUMBLER LOCK
NOTE: Switch installation is permanent. Switch cannot be removed from lock
after assembly. Attempts to separate switch and lock may damage switch.
CONTACT MATERIAL
OPTION
CODE
Q (STD.)
B
G
CONTACT AND TERMINAL MATERIAL
RATINGS
SILVER ²
POWER
4 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC (UL / CSA).
GOLD ¹
LOW LEVEL / DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
GOLD OVER SILVER ³
LOW LEVEL / DRY CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX. OR 4 AMPS @ 125 V AC OR
28 V DC; 2 AMPS @ 250 V AC (UL / CSA).
CONTACT MATERIAL / APPLICATION RECOMMENDATIONS — SEE CHART, PAGE L-31.
1 _{CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.}
2 _{CONTACTS & TERMINALS: Copper, silver plated (standard with all}
termination options).
3 _{CONTACTS & TERMINALS: Copper, with gold plate over silver plate.}
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
NONE (STD.) NO SEAL
SEAL
E EPOXY SEAL
H-14
Not available on YF45 models.
C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: [phone] Fax: [phone]
Europe Sales Tel: [phone] Fax: [phone] S Asia Sales Tel: [phone] Fax: [phone]
Rev. A 8/99