PSM712 Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – STANDARD CAPACITANCE TVS ARRAY

PSM712
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
A
L
3
BS
1
2
K
V
G
C
D
H
MOUNTING PAD
0.037” (0.95mm)
0.033” (0.85mm)
0.079” (2.00mm)
0.033” (0.85mm)
SOT-23
0º - 10º
J
PACKAGE DIMENSIONS
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
2.80
3.04
0.1102 0.1197
B
1.20
1.40
0.0472 0.0551
C
0.89
1.11
0.0350 0.0440
D
0.37
0.50
0.0150 0.0200
G
1.78
2.04
0.0701 0.0807
H
0.013
0.100 0.0005 0.0040
J
0.085
0.177 0.0034 0.0070
K
0.45
0.60
0.0180 0.0236
L
0.89
1.02
0.0350 0.0401
S
2.10
2.50
0.0830 0.0984
V
0.45
0.60
0.0177 0.0236
NOTES
1. Dimensioning and tolerances per ANSI Y14.5M, 1985.
2. Controlling Dimension: Inches
3. Pin 3 is the cathode (Unidirectional Only).
4. Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance
with EIA-481.
2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape,
i.e., PSM712-T7.
3. Suffix -T13 = 13 Inch Reel - 10,000 pieces per 8mm tape,
i.e., PSM712-T13.
Outline & Dimensions: Rev 1 - 11/01, 06012
COPYRIGHT © ProTek Devices 2003
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical
characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that
the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the
selection or specifications of such products.
05094.R2 9/03
4
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
Web Site: www.protekdevices.com
www.protekdevices.com