M-201-T Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – High flow,adjustable flow switch with right-angle flow

M-201-T Series
Dimensional and Cut-Away Drawings (continued)
Illustrated below is the M-201-T Model with 1/2” flares.
Factory P reset Information
The M-201-T is an adjustable flow switch. The flow set point can be set at the factory, upon request. Proper
calibration of the set point requires the following information. When purchasing a flow switch that needs to be
factory preset, use the “Set Point Calibration” form on page i-vi or provide this information on the purchase order.
• Calibration set point,
• Increasing or decreasing flow,
• Fluid type (i.e. liquid or gas),
• Density or specific gravity,
• Viscosity,
• System pressure and temperature,
• Flow direction (i.e. upward or downward), and
• Mounting orientation (i.e. horizontal or vertical).
O rdering Information
Standard Part Numbering
M - Model - Material
Port
Switch
M - 201 -
T
3
1
-
XXX
3 digit number to
201
T - PTFE
3 - 3/8" Flare's 1 - SPST N.O.
4 - 1/2" Flare's 3 - SPDT
identify unique
requirement such as
setting and cable
assembly requirements
to suit customers
applications
4
Malema Flow Sensors • 1060 South Rogers Circle • Boca Raton, Florida 33487 • 1-800-637-6418
561-995-0595 • Fax [phone] • http://www.malema.com • © Copyright 1998 • Catalog # 233