DMX710 Datasheet, PDF (4/6 Pages) List of Unclassifed Manufacturers – DMX512 Transmitter with 6/8/12 digital or analoge inputs

DEVICE CONFIGURATION EXAMPELS
Oscilator Configurations
C1
X0
C2
Q1
X1
GND
DMX710
This example illustrates how to use the DMX710 with a 8MHz crystal. The value of
the capacitors should be in the range of 12-33pF.
Digital And Analog Input Configuration
DIGITAL IN
VCC
ANALOG IN
Some of the pins of the DMX710 can be used as digital or analog inputs. In the digital
mode you have to connect a switch to GND. The analoge mode permit a signal from
GND to VCC.
DMX Interface Configuration
8Mhz
Oszillator
DTC IN
X0
DMX OUT
DTC IN
X0
DMX OUT
DMX710
DMX710
SN75176
The DMX710 is cascadeable, as the DMX exit is connected with the DTC entrance of
the next component. The last DMX exit goes to a line driver. It is possible to use one
oszillator for all DMX710.
© 2005 Markus Siwek
WWW.DMX4ALL.DE
4