AT4002 Datasheet, PDF (32/34 Pages) List of Unclassifed Manufacturers – Accessories Hardware

AT4179
Round Cap for Bright LED
Polycarbonate
Colors: JB JC JD JF
Series: LB Panel Seal
(19.0) Dia
.748
(9.0)
.354
Accessories & Hardware
AT4180
Snap-on Knob
Polyamide
Knob: Black
Flange: Transparent brown
Series: FR01
(2.1)
.083
(9.6)
.378
(0.8)
.031
AT4181
Splashproof Boot Assembly
Boot Material: Black silicon rubber
Hex Nut Material & Finish:
Nickel plated brass
O-ring Material:
Nitrile butadiene rubber
Series: M P S WT
(14.8)
.583
(18.6)
.732
(24.3)
.957
(12.1) Dia
.476
(8.0) Dia
.315
M12 P1
(21.5) Dia
.846
(1.0)
.039
(17.5) Dia
.689
Switch Installation Instructions
1. Install switch bushing into mounting hole of panel from the back and
adjust bushing to protrude 3.5 ~ 5.5mm (.138 ~ .217”).
2. Install o-ring on bushing and tighten nut from above.
3. Insert boot onto nut. Be sure the boot and nut are a firm, secure fit.
Non-Splashproof Switches
M, P or S Toggles with 12mm Bushings
Boot
For 12mm Bushings in M, P, S & WT Toggles
Boot & Nut Assembly Instructions
1. Stretch base of the boot to fit around outer edges of the nut.
2. The ridge inside of boot must be firmly seated in groove of the nut.
3. Moving all around perimeter, push (with about 10N of force) toward
center to assure boot seals tightly into groove (with no air pockets).
3
3
3
1
1
3
3
3
2
Splashproof Switches
S1AW ~ S29AW S Toggles WT Toggles or M Toggle with B3 Bushing
Boot
Boot
(3.5) ~ (5.5)
.138 ~ .217
Nut
O-ring
Panel
(3.5) ~ (5.5)
.138 ~ .217
Nut
O-ring
Panel
(3.5) ~ (5.5)
.138 ~ .217
Nut
O-ring
Panel
Use boot, nut and o-ring as shown. Use lockwasher and hexagon nut
(from standard switch hardware) behind panel.
Use boot, nut and o-ring as shown. Use o-ring only (from standard switch
hardware) behind panel.
Series or Part Numbers
Panel Thickness (Maximum)
• M Series B2 Toggles with 12mm B1 & B3 Bushings
• P Series B Toggles with 12mm Bushing
• S31 ~ 39, S41 ~ 49, S31F ~ 33F, S41F ~ S43F, S31T ~ 33T, S41T ~ 43T
• S301 ~ 309, S331 ~ 339, S301F, S331F ~ 333F, S335F, S301T ~ 309T, S331T ~ 339T
• S421 ~ 429, S421T ~ 429
5.0mm (.197”)
• WT11S ~ 29S, WT11T ~ 29T, WT11L ~ 29L
• S1A ~ 7A, S21A, S1F ~ 7F, S21F
• S114, S116
• S1AW ~ 9AW, S21AW, S25AW ~ 29AW
3.5mm (.138”)
Y
3.0mm (.118”)
Color Codes: A Black B White C Red D Amber E Yellow F Green G Blue H Gray J Clear
w w w.nkk.com
Y33