GJ1117A Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator

ISSUED DATE :2003/08/02
REVISED DATE :2006/12/14E
Electrical Characteristics
Parameter
Reference Voltage
GJ1117AADJ
GJ1117A-1.5
GJ1117A-1.8
Output Voltage
GJ1117A-2.5
GJ1117A-3.3
GJ1117A-5.0
Line Regulation
GJ1117A-XXX
GJ1117AADJ
GJ1117A-1.5
Load Regulation
GJ1117A-1.8
GJ1117A-2.5
GJ1117A-3.3
GJ1117A-5.0
Dropout Voltage
(VIN-VOUT)
GJ1117A-XXX
Conditions
MIN
Io=10mA, Tj=25к, (Vin-Vout )=1.5V
1.225
Io=10mA, Tj=25к, 3.0V Vin 12V
1.470
Io=10mA, Tj=25к, 3.3V Vin 12V
1.764
Io=10mA, Tj=25к, 4.0V Vin 12V
2.450
Io=10mA, Tj=25к, 4.8V Vin 12V
3.235
Io=10mA, Tj=25к, 6.5V Vin 12V
4.900
Io=10mA, Vout+1.5V<Vin<12V, Tj=25к
-
Vin=3.3V, Vadj=0, 0mA<Io<1A, Tj=25к(Note 1,2) -
Vin=3.0V, 0mA<Io<1A, TJ=25к (Note 1,2)
-
Vin=3.3V, 0mA<Io<1A, TJ=25к (Note 1,2)
-
Vin=4.0V, 0mA<Io<1A, TJ=25к (Note 1,2)
-
Vin=5.0V, 0mA<Io<1A, TJ=25к (Note 1,2)
-
Vin=8.0V, 0mA<Io<1A, TJ=25к (Note 1,2)
-
TYP
1.250
1.500
1.800
2.500
3.300
5.000
-
-
12
15
20
26
40
MAX UNIT
1.275 V
1.530 V
1.836 V
2.550 V
3.365 V
5.100 V
0.2 %
1
%
15 mV
18 mV
25 mV
33 mV
50 mV
Io=1A, ( Vout=0.1% Vout)
-
1.3 1.4 V
Current Limit
GJ1117A-XXX Vin-Vout=5V
1.1
-
-
A
Minimum Load Current Adjustable model Vin=5V
-
5
10 mA
Adjust Pin Current
Adjustable model Vin=12V, Io=10mA
-
50 100 uA
Quiescent Current
fixed model
Vin=12V, Io=0mA
-
-
12 mA
Thermal Regulation
TA=25к,30ms pulse
- 0.008 0.04 %/W
Ripple Rejection
F=120HZ,COUT=25uF Tantalum, IOUT=1A
GJ1117A-XXX VIN=VOUT+3V
-
60 70 dB
Temperature Stability IO=10mA
-
0.5
-
%
JA Thermal Resistance
Junction-to-Ambient(No
heat sink ;No air flow)
JC Thermal Resistance
Junction-to-Case
Control Circuitry/Power Transistor
-
92
- к/W
-
10
- к/W
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation
are measured at a constant junction Temperature by low duty cycle pulse testing. Load regulation is measured at the
output lead =1/18” from the package.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is
determined by the difference in input and output and the output current. Guaranteed maximum power dissipation will
not be available over the full input/output range.
GJ1117A
Page: 3/4